Skip links
Shuban Infra Engineering Corporation

ROOFING & CLADDING

Shuban Roofing 1015 Trapezoidal / Hi-Rib Profiles are used for widely diverse applications due to large range of geometric designs, they offer variety of architectural possibility. Shuban 1015 /1000 mm Trapezoidal / Hi-Rib Profiles are supplied not only in different sections and thickness but also various lengths and required dimensions. This profile suitable is suitable for Roof & Wall Panels.

Shuban 1015 / 1000 Trapezoidal / Hi-Rib Profiles is for Industry or Trade, Studio, Cold storage, Ware House, Airport Hanger, Railway Station, Bus Stop, Under Construction Building, Boundaries & Architectural Building.

MATERIAL SPECIFICATIONS

Pre-Painted Galvanized Steel Sheets (PPGI)      

Material Confirm to   :  S 277, IS 513 & 14246                         

Coating                            Hot Dip Galvanized Iron                         

Thickness                        Standard Thickness 0.50 mm                

Zn Coating (GSM)          Zn 120 Standard                                       

Paint Systems                RMP, SMP, PVDF                                                     

(Regular Modified Polyester)                                                                 

Yield Strength                   245 Mpa & 340 Mpa                                  

Primer Service Coat         5 u Micron Epoxy                                        

Top Coat (Exposed Surface) – 18 u to 20 u                                          

Bottom Coat                             5u to 7u             

 

GALVALUNE MILL FINISH ( BARE GALVALUME) 

Material Confirm to    :  AZ  1397.                                          

Coating                             Cold Rolled Steel                                      

Thickness                        Standard Thickness 0.47 mm                            

Zn Coating (GSM)         Zn 120 Standard  

Yield Strength                   245 Mpa & 340 Mpa               

MATERIAL SPECIFICATIONS

Pre-Painted Galvalume Steel Sheets (PPGL)

Material Confirm to    ;  AS -1397   

Coating                          ; Galvalume       

Thickness                        Standard Thickness 0.50 mm  

AZ Zn Coating (GSM)    AZ Zn 150 Standard   

Paint Systems                 SMP, RMP, PVDF                 

 (Silicon Modified Polyester)

Yield Strength                      350Mpa & 550 Mpa

Primer Service Coat            5 u Micron Epoxy

Top Coat (Exposed Surface) – 18 u to 20 u

Bottom Coat                             5u to 7u

 

ALLUMINIUM MILL FINISH (COLOUR COATED)

Thickness Range 0.71 mm to 1.20 mm

CURVED SHEET                                  

Curved sheets are available from Shuban 1015 Profile. Curving Through computerized. PLC controlled crimping machine The minimum radius of curve is 500 mm, start lead is 50 mm & end lead is 350 mm. The minimum length of curved sheets is 700 mm. thereby making length of curved sheet possible as 1190mm length restriction apply to curved sheets. Curved sheet in high tensile metal is supplied at client’s risk.

Maximum Support Spacing (mm)
Types of Span Coated Thick (mm) Coated Thick (mm)
Roof 0.45 mm 0.50 mm
Single Span 950 1300
End Span 1200 1400
Internal Span 1760 2050
Unstiffened eaves overhang 150 200
Stiffened eaves overhang 300 350
Wall
Single Span 1700 1900
End Span 2450 2600
Internal Span 2850 3000
Overhang 150 200
H.A.L LTD NASHIK - ROOFING-1
ROOFING & CLADDING-1
SUFAR FACTORY ROOFING-1

PROFILE POLYCARBONATE/FRP SHEETS

PROFILE POLYCARBONATE SHEET

Profile Polycarbonate Sheet can be supplied at custom sizes as per requirement, these sheets are widely demanded by the clients

Polycarbonate matching profile sheet mainly used in warehouse segments & manufacturing units for daylight purpose.
Owing to their colourful look and excellent handwork, these sheets are widely demanded by the clients.

FEATURES OF MATCHING PROFILE POLYCARBONATE SHEET

  • Matching with all Metal Sheet Profile
  • Light Weight
  • From 800mm to 6.5m Length

TYPES OF MATCHING PROFILE POLYCARBONATE SHEET

  • Compact
  • Embossed
  • Colour: Clear / Bronze / Opal White / Blue

APPLICATIONS OF MATCHING PROFILE POLYCARBONATE SHEET

  • Warehouse roofing matching any kind of metal sheet
  • Gladding
  • Factories

FRP COLOURED SHEETS

The machine made FRP coloured sheets that we offer are made from opaque and translucent fiber glass, plastic resin and others. Our range is known for their UV stability, impact resistant and superior finish

Specification:

  • Thickness: 0.8mm,1.2mm,1.5mm,2mm, 2.5 mm, 3 mm, 4mm
  • Colors : Clear, Sky Blue,Light Green . Off White
  • Profiles : Over 100 General PrLength : Cut as per Customers Requirement
  • Density: g/cm 2 1.4 to 1.5
  • Fiber Content : >25%
  • Light Transmission : 60-85%
  • Applicable temperature : 40°C to 120°C

Application areas :

  • Industrial : Warehousing Sheds, Site Cabins, Security Cabins, Shelters, Canteens
  • Domestic : Parking Sheds, Room Extensions, Toilets, Bathrooms, Roofing
  • Transportation : Bus Station, Ticket Counters, Parcel Offices, Shelters
  • Agriculture: Farm House, Poultry Farms,Generator Rooms, Sheds

Features:

  • Rust Proof
  • High impact strength
  • Fire Retardant
  • Light in Weight
  • Resistant to all types of Weather
  • Free from problems of Cracking, Wrapping and Buckling